Optionalsource: DeepPartial<DocumentScannerCameraConfiguration>Determines whether the document should be cropped automatically after a manual snap or not.
Default is true.
After a page has been snapped, the delay in milliseconds before auto snapping resumes for the next page.
Default is 200.
Determines if auto snapping is enabled or not.
Default is true.
Controls the auto snapping speed. The sensitivity must be between 0.0 and 1.0. A value of 1.0 triggers auto snapping immediately, while a value of 0.0 delays the auto snapping by 3 seconds. The default value is 0.66 (2 seconds).
Default is 0.66.
The size of the image from camera which would be sent to the scanner for live scanning.
Default is FULL_HD.
Determines which camera module to use on start-up.
Default is BACK.
Tries to select the camera preview aspect ratio that best matches the given aspect ratio. If no exact match is found, it selects the closest one available. Android only.
Determines which camera preview mode to use.
Default is FILL_IN.
Determines the prioritization of still image quality and capturing speed.
Default is BALANCED.
When enabled the hardware volume up/down buttons can be used to capture an image if manual snapping is enabled. For iOS version 17.2 or later is required. On iPhones with camera control (iPhone 16 series) this also enables zooming and capturing with the camera control.
Default is true.
The default zoom factor on start-up.
Default is 1.0.
Determines whether the flashlight is enabled or not on start-up.
Default is false.
The rate of detections/recognitions per second in normal performance mode. If the number is equal or greater than the video frame rate, no frames will be skipped.
Default is 20.
Determines whether locking the focus at the minimum possible distance is enabled or not (device-specific).
Default is false.
Determines whether pinch-to-zoom is enabled or not.
Default is true.
Determines whether touch-to-focus is enabled or not.
Default is false.
Configuration of the camera behavior.